Surfboard Wall Rack - Triple Wooden Deluxe

Surfboard Storage Rack Australia - TRIPLE wall rack for 3 surfboards - with Wooden Base (Deluxe) - by Surf Dogz

• surfboard wall storage rack quad for 3 surfboards or longboards

• rugged design suitable for up to 11kg (25lbs) per surfboard

• 48cm (19“) padded steel pegs with plastic end caps

• TBA (TBA”) high Deluxe Poplar base with warm Gloss finish 

• pegs are 2cm (3/4″) diameter galvanized steel tube (no PVC sprinkler pipe or wooden dowels here!)

• spaced at 20cm (8″) centre to centre (tilted up 10 degrees)

• ships fully assembled with heavy duty mounting hardware and instructions (1/4” hex head lag screws – not just wood screws)

• weight 4kg (9lb)

• hand crafted in Huntington Beach, USA 

• 1 week FREE shipping anywhere in Australia! 

THE HUNDRED POUND BOARD TEST

Each type of Surfdogz wall rack (Surfboard and SUP) is load tested with fifty pounds (22.5kg) of down force, on a single peg, twelve inches out from the base. This is the equivalent of a one hundred pound (45kg) surfboard at rest on the rack set. In all tests, deflection of the rack peg was insignificant with no permanent deformation or damage to the peg/base connection point. We don’t recommend trying this on any other brand of rack!

FAQS

Q: How strong are Surfdogz Racks?
A: Our racks, both wood and polysteel (HDPE) base, are designed to support even the heaviest long boards and paddleboards. They match or surpass even the expensive metal racks on the market, and our racks will not rust or corrode.

Q: Which is better, Surfdogz wood or polysteel base?
A: Strength wise, they are comparable. Poplar has a warm oak stain finish, where polysteel (black) has a sleek, modern look, and has the advantage of being weather-proof. (HDPE racks are supplied with hot-dip galvanized fasteners, which will resist corrosion and rust for many years)

Q: How far apart should the racks be spaced?
A: We recommend skipping one wall stud (usually spaced at 16”) so that the racks end up 32” apart. This is just right for long or short boards.

Q: Why are there so many mounting screws on the polysteel (HDPE) racks?
A: In tests, the HDPE rack pegs tended to sag slightly under heavy load. The rack was not damaged, and returned to its original position when the load was removed.
By positioning a mounting bolt just above each peg this problem has been completely eliminated.

Q: What is HDPE?
A: High Density Polyethylene is a recycled thermo-plastic material made from reprocessed polyethylene containers, such as milk bottles. It is an extremely strong and heavy structural material that is impervious to moisture. It contains no organic fillers, like wood chips, as do cheaper “plastic lumber” materials. California uses HDPE to construct picnic benches at state beaches and parks.

SURFDOGZ

As a family business with roots in the Huntington Beach, California surfing culture (reaching back to before World War II), Surfdogz have filled a niche in the board sports market for strong, reliable, and reasonably priced surfboard wall racks for over ten years. Four years ago they expanded their line to include SUP wall racks. Of course each rack is hand crafted in their own California shop.